Skip to main content

Vibratissimo

Vibratissimo is a line of App-controlled Bluetooth Vibrators.

Device Identification

All Vibratissimo devices share the same default BLE name ("Vibratissimo"), as well as same service and characteristic UUIDs.

Bluetooth Details

Service UUID

00001523-1212-efde-1523-785feabcd123

Mode Setting Control (Write) Characteristic UUID

00001524-1212-efde-1523-785feabcd123

Motor Speed Control (Write) Characteristic UUID

00001526-1212-efde-1523-785feabcd123

Device Temperature (Read) Characteristic UUID

00001527-1212-efde-1523-785feabcd123

Protocol

The control protocol for the Vibratissimo allows the user to:

  • Set a pattern/mode
  • Control motor speed (when using motor control pattern)
  • Retreive the temperature of the device

Mode Selection

Mode selection is send via writes to the mode selection characteristic. It is a 2 byte value, though it is currently unknown what the second byte represents.

Value of the first byte:

  • 0x01: Turn device on
  • 0x02: Play pattern that ramps up and down
  • 0x03: Put device into "motor control" mode

Sending anything higher than 0x03 will cause the device to stop working until the host disconnects and reconnects

Motor Control

If the device is put into "motor control" mode, it can be controlled via writes to the Motor Speed Control characteristic. It is a 2 byte value, though it is currently unknown what the second byte represents.

Value of the first byte is 0x00-0xff, with 0x00 turning motor off, and 0xff setting motor full on.

Temperature

Temperature is retreived via a read from the Temperature characteristic. It is a 2 byte value, though it is currently unknown what the second byte represents.

Value of the first byte is temperature, with lower being higher.