We-Vibe
Bluetooth Details
Main Service ID
f000bb03-0451-4000-b000-000000000000
Control Characteristic
f000c000-0451-4000-b000-000000000000
The control characteristic takes 8 bytes, as follows:
0f PP 00 XY 00 0Z 00 00
- P - Vibration pattern
- X - Internal motor intensity
- Y - External motor intensity
- Z - The last two bits theoretically turn motors X and Y on/off, although it's
unclear if this is actually used on all models.
0x03(11) - Both on0x02(10) - X on0x01(01) - Y on0x00(00) - Both off
The vibration patterns are:
| Code | Name |
|---|---|
0x00 | Off |
0x03 | Vibrate |
0x04 | Peak |
0x05 | Pulse |
0x06 | Echo |
0x07 | Wave |
0x08 | Tide |
0x0e | Surf |
0x0f | Bounce |
0x10 | Massage |
0x11 | Tease |
0x12 | Crest |
0x13 | Chachacha |
0x14 | Step |
0x15 | Ramp |
0x16 | Tempo |
0x17 | Heartbeat |
Note that a motor intensity of zero does not actually turn the motor off, for
that you will need to either use the 0x00 pattern, or perhaps the 6th byte of
the control characteristic.
Info Charachteristic
f000b000-0451-4000-b000-000000000000
This can be read, which results in the following 8 bytes:
01 PP ZZ ZZ ?? WW XY MM
- P - Vibration pattern
- Z - Battery usage.
FFFFis 100%,0000is 0%. - W - Temperature, in degrees Fahrenheit
- X - Internal motor intensity
- Y - External motor intensity
- M - Device model
The device models are:
| Code | Name | # motors | BLE name |
|---|---|---|---|
0x00 | Default dual-motor | 2 | default |
0x02 | Jive | 1 | jive |
0x10 | Gala | 2 | gala |
0x20 | Verge | 1 | verge |
0x30 | Pivot | 1 | pivot |
0x35 | Classic | 2 | classic |
0x40 | Ditto | 1 | ditto |
0x45 | We-Vibe | 2 | cougar / 4plus |
0x50 | Sync | 2 | sync |
0x60 | Bloom | 1 | bloom |
0x70 | Nova | 2 | nova |
0x80 | Wish | 1 | wish |
0x90 | Rave | 1 | rave |
Vector/Moxie Changes
The Vector and Moxie devices seem to have a different protocol.
Sources
This document is based on the following sources:
As well as my own testing on a We-Vibe Sync.